ENSONIQ ASR-10 Bedienerhandbuch Seite 60

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 390
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 59
Section 2 — System•MIDI
System•MIDI Commands 17
CMD
BACKUP/RESTORE
SYSTEM•MIDI
Press Command / System•MIDI / scroll using the arrow buttons
The BACKUP/RESTORE command allows you to make a backup copy of all of the information
on a SCSI Storage Device. If the drive later fails and must be reformatted, or if you are switching
to another drive, you can restore the drive from the backup copy.
Press Command, then System•MIDI, and scroll until “BACKUP/RESTORE” appears in the
display.
Press Enter•Yes. The ASR-10 will show:
CMD
SYSTEM
STOP
FUNCTION=BACKUP
This allows you to select either the BACKUP or RESTORE function. Use the Up/Down Arrow
buttons or the Data Entry Slider to select the correct function.
Press Enter•Yes, and the ASR-10 will display:
CMD
SYSTEM
STOP
DEVICE=SCSI 0
This allows you to select the device that you want to backup or restore. You may only select SCSI
0 through 7. Press Enter•Yes. The ASR-10 will display:
CMD
SYSTEM
STOP
STORAGE DEVICE=FLOPPY
This allows you to select the device that you want to use to store the backup data. You may select
SCSI 0 through 7, or the FLOPPY drive. Press Enter•Yes, and the ASR-10 will proceed with
either BACKUP or RESTORE.
Seitenansicht 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 389 390

Kommentare zu diesen Handbüchern

Keine Kommentare