ENSONIQ ASR-10 Bedienerhandbuch PDF herunterladen (Seite 302)

Section 13 — Sequencer and Audio Track Parameters ASR-10 Musician’s Manual

20 Track Commands

There are always 96 clocks per quarter note. The number of beats in a bar depends upon the time

signature of the sequence. The number of bars depends upon the sequence length.

Sequencer tracks are made up of note events that occur at some location in the track. The location

is defined in terms of bars, beats, and clocks. Note events consist of key, velocity, and duration

information.

In the illustration above, an event occurs at BAR 1, BEAT 2, CLOCK 48. The note event is key F4.

It was struck at a velocity of 88 (V=88). Its NOTE LENGTH (duration) is 22 CLOCKS. All this

information is displayed for each key event when you use the EVENT EDIT TRACK command.

You can change the key, velocity, or length of any key event. You also can delete events and

insert new ones.

The EVENT EDIT TRACK function works on an individual track basis.

• With the track you want to edit selected, press the Command button, followed by the Track

button. Scroll until the display shows EVENT EDIT TRACK. Press the Enter•Yes button.

The display shows:

Current Event Type Event Location

Event ValueKey Name

Event Cursor

STOP

BEATCMD CLOCKBAR

This is the Event Locating screen.

Event Cursor

When this field is selected, you can use the Data Entry Slider or Up/Down Arrow buttons to step

ahead or back in time among the events in the track to find the one(s) you want to edit. When

you press the Up/Down Arrow buttons, it will advance to the next or previous event of the type

specified in the Event Type Filter. Moving the Data Entry Slider will scroll quickly through all

the events in the track. You will hear the notes in the sequence play as you step through the track.

Current Event Type

This displays the current event type being viewed. This parameter is display only and cannot be

changed from this screen.

Key Name

This parameter displays the key name that is either being played (when Current Event Type is

“KY” KEY EVENTS) or being affected by pressure (when Current Event Type is “KP” KEY

PRESSURE).

To change the Key Name for the current event, select the Key Name parameter and play the new

key on the keyboard.

Event Value

This shows the value of the current event. The values can be changed using the Data Entry

Slider or Up/Down Arrow buttons. These changes take place as they are made.

1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 389 390

Keine Kommentare

ENSONIQ ASR-10 Bedienerhandbuch Seite 302