ENSONIQ ASR-10 Bedienerhandbuch PDF herunterladen (Seite 175)

Section 9 — WaveSample and Layer Concepts ASR-10 Musician’s Manual

4 WaveSample Commands

WaveSample Commands

There are many commands for working with WaveSamples and wave data. Rather than putting

them all on one page, they are broken down into three pages.

The Command/Wave page contains the standard copy and delete commands for WaveSamples,

plus several looping commands.

The Command/Amp and Command/LFO pages contain amplitude and wave data processing

commands respectively. Some of these are fairly low-level operations that are rarely used. They

are included for completeness.

Note: Always make sure the WaveSample you want to edit is selected on the Edit page.

Messages

• NO EDIT WS SELECTED — go to the Edit page and select a WaveSample you want to work

on.

• WAVESAMPLE IS A COPY — means the WaveSample you are editing is not an original, but a

copy. If you press Enter•Yes in response to this message, the ASR-10 will take the data from

the original WaveSample and copy it into the WaveSample you are editing. This will make

the instrument you are editing larger. If this is undesirable, use the WAVESAMPLE

INFORMATION command to find which WaveSample is the original. Then perform the

command on the original.

• LAYER NOT IN PATCH — press Edit, then Instrument and select the correct layer. Use the

Arrow buttons and enable the layer in the current patch.

• SAMPLES NOT SAME SIZE — means that the WaveSample is in a stereo layer, and its

companion WaveSample is not the same size. This message is designed to prevent accidental

damage to mono WaveSamples in stereo layers. If you’re sure that you want to perform the

command, press Edit/Layer and set STEREO LAYER LINK= OFF.

• NO AUDITION - OK? — when there is not enough free memory available for the Audition

function to operate, this screen will appear. This is because the Audition function requires as

much free memory as the size of the sample being processed. When processing samples in

stereo layers, the Audition function requires twice as much free memory. If you press

Enter•Yes in response to this message, the ASR-10 will execute the command without any

audition. Pressing Cancel•No will abort the command.

Note: Wherever you see the notation ##, that symbol will represent the numeric value of a parameter

whose setting or level is considered arbitrary to the subsequent discussion. For example, if

SCALE DEPTH= ## DB, the ## represents the entire range of this parameter. You can use the

Data Entry Slider or Up/Down Arrow buttons to explore the range of values.

WaveSample Commands in Stereo Layers

When Edit/Layer STEREO LAYER LINK= ON, the wave data commands on the

Command/Wave, Command/Amp, and Command/LFO pages will be simultaneously

performed on the corresponding WaveSample in the companion layer.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 389 390

Keine Kommentare

ENSONIQ ASR-10 Bedienerhandbuch Seite 175