ENSONIQ ASR-10 Bedienerhandbuch PDF herunterladen (Seite 205)

Section 11 — WaveSample and Layer Parameters ASR-10 Musician’s Manual

2 Edit/Pitch Parameters

EDIT

BEND RANGE

PITCH

Press Edit / Pitch / 6

This parameter allows you to set the pitch bend range on the WaveSample level.

Range: 0 through 12 semitones, GLOBAL

Note: When BEND RANGE=GLOBAL the WaveSample will use the GLOBAL BEND RANGE setting

on the Edit/System•MIDI page.

EDIT

PITCH MOD - AMOUNT

PITCH

Press Edit / Pitch / 7

Use this parameter to assign one of fifteen modulators to modulate pitch, and to set the amount

(depth) of that modulator.

Range: -99 to +99

EDIT

WS RANGE LO - HI

PITCH

Press Edit / Pitch / scroll using the arrow buttons

This parameter determines the key range the selected WaveSample will cover. Select the WS

RNG LO parameter, play the key that you want to be the low key, the cursor will then

automatically switch to the HI parameter, which can then be set in the same fashion.

Range: KY0 to K11, C0 to G9

Note: Keys in the octave below C0 are displayed as KY0 through K11. These values are only accessible

when the Instrument is transposed up.

Note: As with the instrument key range, if you accidentally set the High Key below the Low Key, the

selected WaveSample will not be heard.

Command/Pitch Page

These commands allow you to create, delete and manipulate pitch tables. The ASR-10 can store

up to eight user-defined pitch tables in each instrument. Each layer can use a different pitch

table. Which pitch table a given layer will use is selected on the Edit/Layer page.

CMD

EDIT PITCH TABLE

PITCH

Press Command / Pitch / 0

Use this command to create or edit a pitch table.

• Sample a sound or load a sound from disk. If you sampled a sound, pick C4 as the root key.

• Select EDIT PITCH TABLE.

• Press Enter•Yes. When no pitch tables exist in the currently selected instrument, the display

reads CREATE NEW PITCH TBL? Pressing Enter•Yes will assign the newly created pitch

table to the currently selected layer. Note that when STEREO LAYER LINK= ON, this

command will also assign the newly created pitch table to the companion layer.

• If multiple pitch tables exist in the current instrument, you must first assign a layer in the

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 389 390

Kommentare zu diesen Handbüchern

Keine Kommentare

ENSONIQ ASR-10 Bedienerhandbuch Seite 205

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Klaviere ENSONIQ ASR-10