ENSONIQ ASR-10 Bedienerhandbuch PDF herunterladen (Seite 151)

Section 6 — Effect Parameters ASR-10 Musician’s Manual

46 Edit/Effect Parameters

ROM-48 RUMBLE FILTR

RUMBLE FILTR is a high pass filter in cascade with a low pass filter, fourth order (24dB per

octave). The high pass filter is good for eliminating turntable rumble. The low pass filter is good

for eliminating hiss. The BUS1, BUS2, and BUS3 MIX parameters can be routed into the effect

with different Dry/Wet mixes. For this algorithm, we recommend mid values of the Mix.

The parameters available for the Rumble Filter are:

HIGH PASS FC Ranges: 4 to 8000 Hz

This parameter controls the boost or cut of the high pass filter frequency applied to the input

signal.

LOW PASS FC Ranges: 100 Hz to 15 KHz

This parameter controls the boost or cut of the low pass filter frequency applied to the input

signal.

FILTER GAIN Ranges: -48 to +48 dB

Because the cascade of high pass with low pass causes an insertion loss, this parameter allows

you to boost the filtered output signal.

MOD SRC 1 MOD SRC 2

DST 1 DST 2

MIN 1 MIN 2

MAX 1 MAX 2

These parameters are explained in detail in Section 5 — Effect Concepts.

ROM-49 PARAM EQ

PARAM EQ offers a minimum phase four band parametric EQ. The parameters available for this

algorithm are:

BASS FC Range: 0 to 1000 Hz

This parameter sets the center of the low frequency parametric.

GAIN Range: -48 to +24 dB

This sets the amount of boost or cut applied to this low frequency parametric.

MID1 FC Range: 0 to 9999 Hz

This parameter sets the center of the mid frequency parametric.

GAIN Range: -48 to +24 dB

This sets the amount of boost or cut applied to this mid frequency parametric.

MID1 Q Range: 1 to 18

This parameter is a bandwidth control that determines the width of the resonant peak at the

center frequency band. By raising the value you can produce a narrower bandwidth.

MID2 FC

GAIN

MID2 Q

These three parameters are identical to the previous three parameters, and are used to control

different bandwidths within the mid range.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 389 390

Keine Kommentare

ENSONIQ ASR-10 Bedienerhandbuch Seite 151