ENSONIQ ASR-10 Bedienerhandbuch PDF herunterladen (Seite 286)

Section 13 — Sequencer and Audio Track Parameters ASR-10 Musician’s Manual

4 Edit/Seq•Song Parameters

EDIT

SEQ REC SOURCE

SEQ•SONG

Press Edit / Seq•Song / scroll using the arrow buttons

This parameter determines what will be recorded when the MIDI IN MODE= MULTI on the

Edit/System•MIDI page — data from the keyboard, from incoming MIDI, or both. Setting this

parameter to MIDI is useful if you want to send data from the ASR-10 to a MIDI processor, then

record only the processed data coming back from the processor. This parameter only has an

effect in MULTI mode; in POLY or OMNI modes the sequencer always records BOTH.

• BOTH — The sequencer will record data received either from the keyboard or via MIDI on the

track’s MULTI IN MIDI channel.

• KEYBD — The sequencer will record data only from the keyboard.

• MIDI — The sequencer will record only data received via MIDI on the track’s MULTI IN MIDI

channel.

• MULTI — This setting allows you to record data onto multiple ASR-10 tracks simultaneously,

but only via MIDI. The ASR-10 will not record notes played on its own keyboard. This is

most useful for recording multiple tracks sent from external sequencers or played from guitar

controllers. The ASR-10 must be set to receive data from MIDI in MULTI mode (MIDI IN

MODE=MULTI on the Edit/System•MIDI page) in order for this feature to work correctly.

Multi-Track Record always operates in REPLACE mode, and when SEQ REC SOURCE=

MULTI, the SEQ REC MODE parameter is automatically set to REPLACE, and cannot be

edited.

Tip: It is possible to record on multiple tracks simultaneously from the keyboard, but only if you set

the Edit/Instrument MIDI STATUS to MIDI for each of the active (primary and layered)

Instrument•Sequence Tracks and then set up a MIDI loop (by connecting the ASR-10 MIDI Out

to its own MIDI In). This procedure is a bit tricky, and should only be attempted if you have a

good understanding of the system.

EDIT SONG ATRK REC

SEQ•SONG Press Edit / Seq•Song / scroll using the arrow buttons

This parameter determines what will be recorded onto Song Audio Tracks when the Song is

selected, and you enter Record with an Audio Track selected.

AUDIO — the sequencer will record Audio Trigger Events in REPLACE mode. AudioSample

data is recorded according to the punch-in rules, described earlier. This is the default value

for this parameter.

MIX+PAN — the sequencer will record AUDIO-MIX and AUDIO-PAN events in ADD mode.

EDIT MUTE ATRKS IN REC

SEQ•SONG Press Edit / Seq•Song / scroll using the arrow buttons

This parameter determines whether or not Audio Track playback will be muted during Audio

Track recording.

YES — Audio Track playback will be muted during Audio Track recording. This is the default

value.

NO — Audio Track playback will not be muted during Audio Track recording.

☞ Note: In combination with setting the Sample•Source Select, REC SRC=MAIN-OUT, setting the

Edit/Seq•Song, MUTE ATRKS IN REC=NO, enables Audio Track Bounce-Down.

1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 389 390

Kommentare zu diesen Handbüchern

Keine Kommentare

ENSONIQ ASR-10 Bedienerhandbuch Seite 286

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Klaviere ENSONIQ ASR-10