ENSONIQ OEX-6sr Bedienungsanleitung

Output ExpanderOEX-6sr

OEX-6sr Operation Manual

OEX-6sr Operation ManualUsing the OEX-6sr with the ASR-lO/ASR-88The ASR can route a single WaveSample, Layer, orInstrument*Sequence Track to any

OEX-6.w Operation Manualuntil you see this display:OUT=BUS 1<name of effect>The OUT parameter allows you to assign the selectedWaveSample (laye

OEX-6sr Operation Manual3) Routing an Instrument*Sequence Track or Audio Track toan OEX-6sr Stereo OutputYou can also route a signal to the OEX-6sr

OEX-6sr Operation ManualUsing the OEX-6sr with the EPS-16 PLUSThe EPS- 16 PLUS can route a single wavesample, layer, orInstrument/Track to any of the

WS=All.. The screen should now look like this:NAME OF INST LYR=A WS=ALLNow select the wavesample to send to the OEX-6 byeither pressing a key on the k

through the effects processor to the main stereo outputs.(You may want to change this.)You have now selected the BUS 2 output of the OEX-6 to play WS

OEX-6sr Operation Manualabove, scroll up/down to BUS 2. The display shouldnow look like this:OUT=BUS2By doing this you have over-ridden any output par

OEX-6sr Operation ManualLimited WarrantyWhat Is CoveredThis warranty covers all defects in material andworkmanship for thirty days from the date of pu

OEX-6sr Operation ManualLimitations Of Implied Warranties And Exclusion Of CertainDamagesAny implied warranties, including warranties ofmerchantabilit

OEX-6sr Operation ManualWhat is the OEX-6sr Output Expander?The OEX6sr is a multi-function digital device that adds sixindividual outputs, or three

OEX-6sr Operation Manual19

Part #9310013401Price $3.95 (US)Model #OM-6sr[ENSONiP)‘”hDINGTHEwORIDINf%WNDhNOVATION

OEX-6sr Operation Manualways; at the WaveSample level or at the track level.Setting-up the OEX-6srAlthough you can set-up your OEX-6sr any way you

OEX-6sr Operation Manual(included) in the position marked by your masking tape.Remember to remove the masking tape and discard. Thenplace the “hook” s

OEX-6sr Operation ManualSingle Space 19” Rack Shelf MountHere’s what you’ll need to get started:l OEX-6sr Output Expanderl Six foot connection cable (

OEX-6sr Operation Manual1) Position the OEX-6sr on the optional rack shelf, aligning thetwo outer holes on the bottom of the OEX-6sr with a pair ofhol

OEX-6sr Operation Manualof the simplest mountings would be to remove themicrophone holder from a mic stand and attach the OEX-6sr(flange) to the stand

OEX-6sr Oueration Manual

OEX-6sr Operation ManualUnderstanding the EPS-16 PLUS Output BussesA sound in the EPS-16 PLUS can be assigned to one of four stereosends, which we ca